THIS PAGE FREE SHIPPING TO ALL LOWER 48 US STATES

HIGH PERFORMANCE SEALANTS / ADHESIVES FOR CHIMNEY REPAIRS AND INSTALLATION

Everguard 400 silicone sealant caulk

Applications - Making formed-in-place gaskets for chimney repairs, compressors, pumps, sealing flashes, vents, flues, gutters, interior wall, marine cabins, sheet metal stacks, ductwork, bonding appliance parts, adhering auto trim, sealing chimney liner top plates, etc.. Tacks in 1 hr, cures in 24 hrs.

10.3 Ounces clear adhesive silicone 100% acetify rated at 450 degrees

High-Temp RTV Red Silicone

Rated for 500 Degree, Continuous and 650 Degree Intermittent. Recommended for sealing connections such as the T & T Snout, rigid liner, etc......... For gas / wood fireplaces, stoves, pellet burners, etc... Product expands and contracts as appliance heats up and cools down. Cures when heat is applied from the appliance.

WOOD BURNING SEALANT HIGH TEMPERATURE APPLIANCE SEALER

Recommended for sealing the firebox assembly and venting of direct-vent balanced flue. For gas / wood fireplaces, pellet and corn stoves. Product cures with heat from the appliance. This is not an adhesive. Maximum temperature range for use: 1050° F/566°C

EVERGUARD REFRACTORY CEMENT

Rated at 3000 degrees, will not shrink, pull away, lose it's sealing properties, or sag. This is a non freezing formula.

Chamber Tech 2000

CHAMBER-TECH 2000 is the answer to those rough, deteriorated, un insulated and improperly formed smoke chambers. CHAMBER-TECH 2000 will insulate, reducing conduction to combustible materials, add needed structural strength and at the same time shape the smoke chamber for efficient flow of smoke and gasses. Cure time is approximately 24 hrs. Cleaning and maintenance will be much easier. 5 gallon Pails.

Crown-Coat Brushable Sealant

Because of its unique quick drying water base technology and its easy brush on application,Crown-Coat Brushable Sealant has become a favorite among chimney professionals. Like Crown-Seal, Crown-Coat is premixed and can be used wherever a long lasting waterproof membrane is needed. Fill larger cracks and voids with patching cement or high quality caulk, then apply two coats of Crown-Coat.