1-866-708-2446 or Email "We look forward to hearing from you!"
Home | About Us | Products | FAQ's | Site Map | Contact Us | Testimonials
304L Stainless Steel Rigid Chimney Liners and ComponentsApplication: SOLID FUEL TYPES - Wood, Coal, Pellet etc...
Click here to view typical components for rigid lining kits. No more lock form seams, or spot welds that are leaky and dangerous enough to be illegal in Europe! One of the great features about our rigid chimney liners is the seam and how it keeps the pipe perfectly round. Lock and spot welded seams warp, ours will not. Our seams are laser welded leaving virtually no seam to be seen. Technology you will only find at Rockford Chimney Supply. No more struggling to force one pipe into the next. These ends slide together for a tight fit, the first time, every time. This is the only brand on the market today to apply TIG/Butt welds to every component; we are light years ahead of the rest. |
||||||
304L Stainless Steel Rigid Liners
Rock Rigid stainless steel 304L chimney liner has the industry's only laser welded seam; it will not warp like all others will over time. 24 gauge stainless steel. It has a smooth interior wall providing you with optimum draft and flow. Warrantied for life. |
Rigid Liner Rain Cap
Stainless steel rigid liner rain caps. Rockford is well known for the quality of its chimney caps and that is important because, after all of your hard work the cap is all you will see from ground level! |
Rigid Liners Top Plate
Our stainless steel rigid liner top plates come with hole diameters ranging from 3" Thru 16". If you have clay tile in your chimney and it is exposed by 1/2" or more at the top of your chimney you will need the terra cotta top plate. Otherwise you will need the flat top plate. |
||||
Rigid Liner Support Clamp
The 18 gauge stainless steel support clamp is installed around the liner, and sets on top of the topplate which supports the liner at the top of your chimney. |
Rigid Liner Storm Collar
Install the stainless steel storm collar around the rigid liner right above the support clamp to keep moisture from entering the flue liner or the chimney cavity. The stainless steel metal is guaranteed not to rust! |
Rigid Liner T, Snout, and Clean Out Cap
Stainless steel rigid liner T, with Removable Horizontal Snout (take off), and Clean Out Cap. |
||||
Rigid Appliance Connector
Dripless rigid liner to fireplace insert vertical connector. The liner fits into the female end of the connector and the male end of the connector fits perfectly into the round exhaust hole on the top of your fireplace insert. |
Adjustable Rigid Elbows
Our stainless steel elbows have laser welded seams for smooth adjusting. These elbows have a female end to accept rigid or black pipe and a male end to complete the connection. No adapter needed! |
Pop Rivets
Stainless steel 1/8" diameter pop rivets with a grip range of 1/8" or 1/4". Either size will work with our rigid chimney liner. You may need a Pop Rivet Gun. Pop Rivets - Pack of 100 |
||||
What Parts Do I Need?Rigid Liner Top Assembly
The diagram at right shows the parts typically needed at the top of the chimney. The rigid liner (1) is inserted into the chimney. The chimney top is covered by the top plate (2) which goes on over the liner. A support clamp (3) holds the liner in place and keeps it from slipping down the chimney. The storm collar (4) covers the gap between the liner and top plate to keep out moisture. The rain cap (5) gives an attractive finished look while keeping rain, birds and critters from getting into your chimney, and sparks from getting out. Connecting to Your Appliance
|
||||||
