Oval Chimney Liner ComponentsNote: Oval chimney liner components are custom made to your specifications, and are not refundable. Please call us if you have any questions. |
|
Oval Flat or Terra Cotta Top Plate
The Flat Plate can be trimmed down with a good pair of tin snips. The Terra Cotta Top Plate comes with stainless steel screws to secure the top plate via a friction fit. See our Terra Cotta Top Plate Sizing Chart. Please select below the top plate size in the first drop down box, then the select the oval collar size in the second drop down window to complete your top plate selection. |
Oval Rain Cap
Quick connect oval rain cap with screen, wind guard, and quick connect clamp system. The rain cap fits on the outside of the top plate collar. Once in place all you need to do is tighten down the clamp that is already on the rain cap. (We will match the rain cap to fit your top plate.) |
Oval Tee and Tee Cap
The tee has an oval shaped body and is attached to the bottom of a chimney pipe / liner. The horizontal (snout) of the tee is round 10" long and fits into the thimble of your chimney wall. Please select a tee body size and snout diameter below. Click on the green picture above to see an illustration of the 3 part tee. |
Oval to Round Connector for Flexible Chimney Liner
Mates a dripless connection between oval flex liner and the round opening or vertical pipe on your appliance. |
Oval Bottom Plate
18"x18" flat bottom plate with an oval collar to accept the oval chimney liner at the bottom. Can be trimmed down with with a pair of good tin snips. |
Oval to Oval Connector
Female to male dripless seam. Connect flex to flex, rigid to flex, and more. (We will match oval to oval connector to the oval size selected in step one. |
)
|
|
|
1-866-708-2446 or Email "We look forward to hearing from you!"
Home | About Us | Our Products | Shipping | FAQs | Glossary | Contact Us | Testimonials
copyright 2006-2012 Rockford Chimney Supply, Inc.
