1-866-708-2446 or Email "We look forward to hearing from you!"
Home | About Us | Products | FAQ's | Site Map | Contact Us | Testimonials
Oval Chimney Liner Components |
|
Oval Flat or Terra Cotta Top Plate
The flat plate can be trimmed down with a good pair of tin snips. The terra cotta top plate comes with SS screws to secure the top plate via a friction fit. Please select below the top plate size in the first drop down box, then the select the oval collar size in the second drop down window to complete your top plate selection. |
Oval Rain Cap
Quick connect oval rain cap with screen, wind guard, and quick connect clamp system. The rain cap fits on the outside of the top plate collar. Once in place all you need to do is tighten down the clamp that is already on the rain cap. (We will match the rain cap to fit your top plate.) |
Oval T and T Cap
The T has an oval shaped body and is attached to the bottom of a chimney pipe / liner. The horizontal (snout) of the T is round 10" long and fits into the thimble of your chimney wall. Please select a T body size and snout diameter below. Click on the green picture above to see an illustration of the 3 part T. |
Oval To Round Connector
Mates a dripless connection between oval flex liner to the round opening or vertical pipe on your appliance. (We will match oval to round connector to the correct size based on the liner size selected in step one.) |
Oval Bottom Plate
18"x18" flat bottom plate with an oval collar to accept the oval chimney liner at the bottom. Can be trimmed down with with a pair of good tin snips. |
Oval to Oval Connector
Female to male dripless seam. Connect flex to flex, rigid to flex, and more. (We will match oval to oval connector to the oval size selected in step one. |
