Stainless steel flexible chimney liner connectors and elbows

Adjustable elbows and chimney liner connectors make it easy to connect stainless steel flex chimney liner components together. You can use these connectors for stainless steel flue liners or other ss chimney liner items to make sure you get a great fit with an airtight connection. Possibly you will need our high temp silicone for added security Everguard Chimney Silicone . Keep Rockford Chimney Supply in mind for all your stainless steel chimney parts required to get the job done.

Adjustable chimney liner elbows and fixed chimney liner elbows for steel flex chimney liners

Our Flex Liner Elbows have laser welded seams for smooth adjusting. These elbows have a female end to accept the flex liner. No adapter needed! If you need an elbow for rigid liner or black pipe see our rigid lining kits page.

T extension slip connector

This connector's male end slips inside the snout of our T. It allows you to add 8 to 16 inches simply by sliding it in or pulling it out of the T snout. A perfect fit, with no cutting required! The expanded end of the slip connector is female with anID of 6 1/16" opening that excepts a standard 6" Pipe. Perfect for when you need to add length to the horizontal snout of the tee.

Universal gas take off connector

Use this to connect a hot water pipe above an appliance. Make a hole in the horizontal pipe using a hole saw with your drill set to reverse. Seal with high heat mill pack and your done. The gas take off measures 10 inches in length.

Round liner to appliance connector, connect liners to fireplaces, wood stoves, inserts, etc.

This little guy comes in every size you can imagine. It is the most used connector we stock. The liner fits into the female side, utilizing the quick connect band. The other end is crimped and ready for your appliance, fireplace, stove, or rigid stainless steel liner pipe. A perfect round fit every time thanks to the smooth weld technology.

Round Liner to liner connector

This drip less female to male chimney flex chimney lining connector / couple connects flex to almost anything. Smooth butt welded seam allows for an air tight connection A great item to have on the job site.

Standard T and T Capwith clean out and 10" snout

Zip Zip and you're done! Features a removable 10" long snout, a secure inside removable clamp connection and the quick connect band. Note: if you need the snout to be less than 10" simply cut it down with a hack saw.

Standard T and T Cap - with 22" snout

Need more length, this T and T cap has the quick connect snout and the snout measures 22" long. Note: if you need the snout to be less than 22" simply cut it down with a hack saw.

Short Body T and T Cap with 10" snout

This is a short body T with clean out cap and 10" snout for constricted thimble installations. Note: if you need the snout to be less than 10" simply cut it down with a hack saw.

Short Body T and T Cap with 22" snout

This is a short body T with clean out cap and 22" snout for constricted thimble installations. Note: if you need the snout to be less than 22" simply cut it down with a hack saw.

22" T Snout

22" Quick Connect Snout without the T body and clean out cap.

Male to male liner coupler

Are you in a tight spot? For tight clearance relining situations, this male to male chimney liner connector is just the ticket!!! The smooth butt welded seam makes this part slide together like butter, crimped on both ends!

Class A Chimney Pipe Adapter

To simplify chimney pipe to pipe single wall connections. This chimney pipe adater has a standard Class A twist lock adater at the top, and a crimped male end at the bottom fit into the pipe your transitioning to the class A chimney pipe.