Buy Now Double Wall Black Pipe Venting

The clearance to combustible materials, such as standard drywall is 2" for a Double-Wall Black Stove Pipe System. The clearance to combustible materials like wood is 6". Clearance to non-combustible materials is 0", but pipes should not actually touch cement, bricks or other non-combustibles.

Use black double wall venting pipe when you need to reduce clearances to combustibles. Double-Wall piping has a limited lifetime warranty. It is a 22-ga. black steel outer pipe with a .015", 430-alloy stainless inner liner. This double-wall construction is cooler on the outside and thus lets you reduce both wall and ceiling clearances down to 6". Double Wall Pipe is available in 6" and 8" diameters.

Black Double Wall Telescoping Smoke Pipe

Used to adjust desired height of double wall stovepipe. Adjust from 12'' to 18" or 36" to 68".

Black Double Wall Stove Pipe Adapter

Used to securely connect double wall black stove pipe to the top of an appliance that has a collar that protrudes above the top or out the back. The inner pipe fits into the collar and the outter pipe fits the outside the collar.

Black Double Wall Stove Pipe Adapter

Used to securely connect double wall black stove pipe to the top of an appliance that does not have a collar on the top our out the back of the unit. The inner pipe will fit into the opening and the outer pipe will fit flush to the unit.

Black Double Wall In Line Damper

When using (DSP) Doublewall Stove Pipe with wood burning stoves you may also want to consider a stovepipe damper kit.

The improved draft control this damper provides helps make the most of DSP's efficient design. Available in two diameters.

Black Double Wall T w/ Clean Out Cap

DSP Stovepipe provides a perfect balance of strength and convenience. Each piece features a double-wall steel construction tough enough to withstand frequent use and high temperatures, yet light enough to be easily transported and installed. The inner wall is stainless steel. Connects directly to double wall stove pipe.

Black Double Wall Elbows

The Elbows (pictured above) can be purchased in 6" or 8" diameter. We have doublewall stove pipe elbows available in 45 and 90 degree angles. These elbows are nonadjustable.

Black Double Wall Masonry Adapter

The Masonry Adaptor mates Double-Wall Stovepipe or Doublewall Elbows directly to the T snout of our Stainless Steel Chimney Liner Kit .

You may need to crimp the end of the chimney liner Tee to fit it into the masonry adapter, you do this with a 5 point Crimper. The overall length is 11 3/4" - the OD of the colar is 10".

The part that actually inserts through the masonry chimney thimble is 9" long. Compatible with Double-Wall Black Stovepipe listed above.

Black Double Wall Finishing Band

This Finishing Band conceals the joints and provides a finished look. When installing Superpipe, the joints appear to be going the wrong direction with a "male-end-up" connection.

This is correct for the outer wall. The inner wall is opposite and provides a "male-end-down" connection. Use this to conceal the joint.

Black Double Wall Increase Reducer

The picture on the left is an Increaser, the picture on the right is the Reducer - that's easy.