FREE same day shipping to any of the lower 48 US States

Dampers

Round Dampers,   Lyemance Dampers,   Lock Top Dampers,   Chim-a-Lators,   Damper Sealing Kits,   Chimney Balloons,  &   Exhausto Fans

Round Stainless Steel Chimney Damper Kit

This round chimney damper is constructed from quality 316Ti stainless steel. Built to withstand repeated chimney fires, it will not melt like other dampers.

Installation is simple: the damper is recessed approximately 6 inches below the flue's termination point. Ideal for restoration projects where an exposed damper would be objectionable. A rain cover of your choice can be installed over it without fear of a freezing or sticking damper.

This is an excellent replacement for worn-out, warped and defective factory-built zero clearance dampers. 30' cable included.

Top Sealing Lyemance Damper

The Original Lyemance Damper is a super unit that gives you energy-saving benefits that will protect your chimney and pay for itself. The Lyemance Damper includes a pull ring, enough cable to run from the damper through the flue to the locking clamp, and all hardware required to complete the installation.

This Seal Tight damper is the tightest sealing damper for your fireplace. These dampers are spring loaded and counter weighted to stay in the open position (for safety). There is also a spring at the end of the cable to ensure a tight tension seal against the gasket when closed. They are easy to install and come with illustrated instructions. Simply adhere the damper on top & fasten the bracket with screws inside the fireplace. All hardware chain, cable, latch, screws, and silicone included.

It won't take long for the Lyemance Damper to pay for itself. Lifetime Warranty.

Lock Top Dampers

All fireplace dampers leak energy - even new ones. So if you have a chimney, you need a Lock-Top top sealing damper! The Lock-Top Chimney Damper is like a storm door for your chimney locking the unconditioned air outside, and keeping the expensive, conditioned air inside. You will be saving energy dollars year-round!

• Constructed with a stainless steel lid attached to a cast aluminum frame by an array of stainless steel springs.
• All Hardware Included including a 30' cable that is dropped down the chimney and operated with a handle mounted in the firebox. Just a tug on the handle will open or tightly close the Lock-Top
• Features a chimney fire safety device that locks the damper open in case of a chimney fire.

Please Note: We do not recommend using top-sealing dampers with gas fireplaces.

CHIM-A-LATOR®

The CHIM-A-LATOR® line of Chimney Cap Dampers easily mount to the top of a masonry or clay tile chimney top with a simple screwdriver. 100% stainless steel. Proven more reliable than bottom mount cast iron dampers, easier to operate, and more efficient to save your energy dollars from being wasted up the chimney. 6 damper handle settings allow you to adjust the damper opening for precise draft control.

How to measure:
Measure OUTSIDE dimensions of flue tile liner, the use the chart below to determine size needed.

CHIM-A-LATOR® Flue Extension

You may need a flue extension to mount your CHIM-A-LATOR® if there is no existing flue tile extending from the chimney top or the flue tile is too short. The extension pieces are 4" tall and tapcon screws are included. CHIM-A-LATOR® easily bolts to the flue extension.

Damper Sealing Kit

This Damper Sealing Kit Is designed to seal off your damper once you have installed a chimney liner which has passed through the the damper and is connected directly to the top of the insert. Intended to be used when a chimney liner is being installed; attaches to existing damper frame.

Includes 2 galvanized metal sections which adjust to fit around the chimney liner. Seals off dampers up to 48" wide. Also includes insulation and all hardware required to complete the job. Click here for damper sealing kit instructions.

Chimney Balloon

The Chimney Balloon (AKA The Chimney Pillow) is an inflatable fireplace draft stopper. Inflate into place in the fireplace flue just above the damper. It makes an airtight seal that blocks outside air and chimney odor from entering your home. The balloon is designed with a low heat melting point that will release the balloon if a fire is accidentally ignited.

Chimney Balloon FAQ
Chimney Balloon Video

Some Possible Applications:

• To seal a poorly operating damper during the off season.
• To plug large fireplaces smoke chambers keeping cold air from enter the home.
• To seal the fireplace flue airtight, so chimney odors and flue smells do not enter the home.
• To plug standard heating vents or cold air returns.
• To plug the chimney at the bottom to pour down insulation mix when installing a chimney liner.

Exhausto Fan

The EXHAUSTO Chimney Fan is the guaranteed solution to stop smoking fireplaces. EXHAUSTO's extremely quiet and reliable chimney fan maintains the perfect draft to ensure a smoke free environment. The fan is easy to use and virtually maintenance free. It can be used with wood or gas fireplaces as well as coal and oil fueled appliances. The fan doubles as a ventilator: Simply turn it on to rid your home of stale air, cigarette smoke, etc.

Click here for details and pricing.