Chimney Dampers, Lyemance Damper, Top Sealing Dampers, Back Draft chimney problems

FREE same day shipping to any of the lower 48 US States

Dampers

Top Sealing Lyemance Damper !

The Original Lyemance Damper is a super unit that gives you energy-saving benefits that will protect your chimney and pay for itself. The Lyemance Damper includes a pull ring, enough cable to run from the damper through the flue to the locking clamp, and all hardware required to complete the installation.

This Seal Tight damper is the tightest sealing damper for your fireplace. These dampers are spring loaded and counter weighted to stay in the open position (for safety). There is also a spring at the end of the cable to ensure a tight tension seal against the gasket when closed. They are easy to install and come with illustrated instructions. Simply adhere the damper on top & fasten the bracket with screws inside the fireplace. All hardware chain, cable, latch, screws, and silicone included.

It won't take long for the Lyemance Damper to pay for itself. Lifetime Warranty.

Lyemance Sizing Chart

Generic Damper Sizes Fits on top of clay chimney liner with I.D. of

8"x 8" 5.5" x 5.5" To 7.5 " x 7.5"

8" x 17" 5¾" x 14¼" To 7½" x 16½"

12" x 16" 9¼" x 12¾" To 11½" x 15½"

9" x 13" 6½" x 10" To 8½" x 12½"

13" x 13" 10" x 10" To 12½" x 12½"

13" x 18" 10" x 15" To 12½" x 17½"

18" x 18" 15" x 15" To 17½" x 17½"

Lock Top Dampers

All fireplace dampers leak energy - even new ones. So if you have a chimney, you need a Lock-Top top sealing damper! The Lock-Top Chimney Damper is like a storm door for your chimney locking the unconditioned air outside, and keeping the expensive, conditioned air inside. You will be saving energy dollars year-round!

Constructed with a stainless steel lid attached to a cast aluminum frame by an array of stainless steel springs.
All Hardware Included including a 30' cable that is dropped down the chimney and operated with a handle mounted in the firebox. Just a tug on the handle will open or tightly close the Lock-Top
Features a chimney fire safety device that locks the damper open in case of a chimney fire.

Please Note: We do not recommend using top-sealing dampers with gas fireplaces.

Chim-a-lator

Features:

Six settings for maximum draft control
Fully assembled for fast installation
Handsome integral cap design
Lifetime warranty
Premium 100% type 304 stainless, Lifetime warranty against rust and manufacturers defects.
In open position, it protects from wind, rain, leaves, birds and animals from entering your chimney; in closed position it helps keep out insects and keeps the warm air inside your home.
Shielded cable for years of service; standard 30' cable included.
These dampers are specifically designed for wood burning fireplace flues and should not be used on flues servicing wood stoves or on fireplaces serving gas log.

Note: If using a top sealing damper with a gas application that is not ventless please use caution to insure when the unit is in operation the damper is open.

The Chim-a-lator line of Chimney Cap Dampers easily mount to the top of a masonry or clay tile chimney top with a simple screwdriver. 100% stainless steel. Proven more reliable than bottom mount cast iron dampers, easier to operate, and more efficient to save your energy dollars from being wasted up the chimney. 6 damper handle settings allow you to adjust the damper opening for precise draft control.

How to measure:
Measure OUTSIDE dimensions of flue tile liner to determine size needed. Pick your size from the drop down box below. Keep in mind that your trying to match your clay liner o.d size to the size closest to the size in the drop down box below. Clay chimney tiles can vary up to 1.5" smaller or larger than the sizes listed in the drop down box below. The sizes in the drop down below are industry standard terms, simply select the size that is close to the o.d size of your chimney tile and it will fit.

You may need a flue extension if there is no existing flue tile extending from the chimney top or the flue tile is too short. The extension pieces are 4" tall and tapon screws are included.

Damper Sealing Kit

Chimney Damper Seal Kit
Damper Sealing Kit

This Damper Sealing Kit Is designed to seal off your damper once you have installed a chimney liner which has passed through the the damper and is connected directly to the top of the insert. Intended to be used when a chimney liner is being installed and the old fireplace damper is being removed.

Includes 2 galvanized metal sections which adjust to fit around the chimney liner. Seals off dampers up to 48" wide. Also includes insulation and all hardware required to complete the job. One size fits all.

Chimney Balloon

The Chimney Balloon (AKA The Chimney Pillow) is an inflatable fireplace draft stopper. Inflate into place in the fireplace flue just above the damper. Purpose - makes an airtight seal that blocks outside air and chimney odor from entering your home.

The balloon is designed with a low heat melting point that will release the balloon if a fire is accidentally ignited. Click here for more details on how to install and use the chimney balloon.

Some Possible Applications:

To seal a poor operating damper during the off season.
To plug large fireplaces smoke chambers keeping cold air from enter the home.
To seal the fireplace flue airtight, so chimney odors and flue smells do not enter the home.
To plug standard heating vents or cold air returns.
To plug the chimney at the bottom to poor down insulation mix when installing a chimney liner.

Exhausto Fan

The EXHAUSTO Chimney Fan is the guaranteed solution to stop smoking fireplaces. EXHAUSTO's extremely quiet and reliable chimney fan maintains the perfect draft to ensure a smoke free environment. The fan is easy to use and virtually maintenance free. It can be used with wood or gas fireplaces as well as coal and oil fueled appliances. The fan doubles as a ventilator: Simply turn it on to rid your home of stale air, cigarette smoke, etc.

Click here for details and pricing.