Stainless Steel Chimney Caps

(All rain guard caps are made from premium 100% prime stainless steel, spark arrestor cap.)

Single Flue
Chimney Cap

Brushed Finish Stainless Steel body adds to the appeal of these caps. Features 3/4" screening. It is fully resistance welded and features a roll formed, 18 gauge 1 piece base, 24 gauge lid, and 8" screen height. The wide base makes for easy installation. Lifetime warranty applies. Ready to ship.

Multiple Flue
Chimney Cap

Accommodates single or multiple flues in one chimney structure. Brushed finish 100% stainless steel body adds to the appeal of these caps. Features 3/4" screening. It is fully resistance welded and features a roll formed 18 gauge 1 piece base, 24 gauge lid, 8" to 12" screen height. The wide base makes for easy installation. Includes loctite anti-seize lube for lid wing nuts and a Lifetime warranty applies. In stock and ready to ship.

WeatherShield
Chimney Cap

TDW WeatherShield model assures a secure wind-resistant fit, without interfering with the convection cooling features of air-cooled chimneys. Protects chimney from adverse weather. Keeps out debris and animals. An exclusive spring-tension connector assures a self-adjusting secure fit. The spring-tension connector enables TDW WeatherShields to fit either DOUBLE or TRIPLE Wall Air-Cooled Chimneys.

Features:

• 100% Stainless Steel Construction
• Installs Easily, Self-adjusting Spring Base
• Lifetime Limited Warranty
• Standard 1" Mesh Screen
• Removable Top For Easy Flue Access
• Easy Maintenance
• Tested To UL 103 Standard

Vacu-Stack
Air Cooled Cap

Is the premier chimney cap (Collar Included) for solving common, wind-related chimney draft problems. Wind-induced downdraft can cause smoke to enter the living space when: Hills, mountains, tall trees, and or tall buildings are in the vicinity. Vacu-Stack also functions as a conventional chimney cap by protecting the chimney from rain, snow, debris, and animals.

Application

Double wall or triple wall air-cooled chimneys. (Collar Included)

Vacu-Stack
Non Air Cooled Cap

Is the premier chimney cap (No Collar Needed) for solving common, wind-related chimney draft problems. Wind-induced downdraft can cause smoke to enter the living space when: Hills, mountains, tall trees, and or tall buildings are in the vicinity. Vacu-Stack also functions as a conventional chimney cap by protecting the chimney from rain, snow, debris, and animals.

Application

Single wall insulated class A chimney pipe or chimney liner

Vacu-Stack
Masonry Cap

Is the premier chimney cap for solving common, wind-related chimney draft problems. Wind-induced downdraft can cause smoke to enter the living space when: Hills, mountains, tall trees, and or tall buildings are in the vicinity. Vacu-Stack also functions as a conventional chimney cap by protecting the chimney from rain, snow, debris, and animals.

Application

Rectangle, square masonry, brick, clay tiled, or block chimneys. (Adapter included)

Top Plate Mount Cap

Round Quick Connect Rain Cap with screen & wind guard. Fasten down the quick connect clamp to the collar of the flex liner Top Plate or Chase Cover and you're done! Sharp looking too! In a tornado your roof will come off before this tears off. And it installs in a snap!

Top Plate Mount Cap

Square Quick Connect Flue Cap with mesh screen. Fasten down the quick connect clamp to the collar of a flex liner Top Plate or Chase Cover and you're done! The sharpest looking rain caps on todays market, and they install in a snap!

Deluxe Hinged Cap

The Deluxe Terra Cotta Hinged Top Termination Terra Cotta Clay Lining Mount attaches to chimneys with exposed clay tile at the chimney top. Simply insert the stainless steel screws into the skirting of the top plate and snug them up to the exposed clay tile at the top of your chimney. Easy and simple installation!

Deluxe Hinged Cap

The Deluxe Flat Hinged Top Termination Top Plate Mount attaches to chimneys with NO clay tile exposed at the chimney top. Using masonry screws simply screw the top plate to the brick, block, masonry chimney top. Easy and Simple Installation!

Round Clay Tile Cap

All parts manufactured from 304 stainless steel. 8" diameter fits outside tile dimensions from 6" to 8-1/2". 10" diameter fits outside tile dimensions from 8" to 10-1/2". 12" diameter fits outside tile dimensions from 11" to 13".

Inside Mount Cap

Rockford is well known for the quality of its chimney flue caps and that is important because, after all of your hard work the cap is all you will see from ground level! This cap fits into the inside opening of a round chimney pipe or round rigid chimney liner. 22 Guage stainless steel rain cap.

Stainless Steel Hip and Ridge Rain Cap

What a difference the small details make! These stainless steel hip and ridge chimney caps have exceptional appeal. Simply put, they add a stunning architectural design to your chimney top.

Features: 100% Stainless Steel from top to bottom, all caps are fully resistance welded, 18 gauge 1 piece base, 22 gauge lid, standard screen is 3/4 mesh and is 10 inches tall. The pitched top of the cap extends approximately 2.5 inches beyond the screen on all 4 sides. The hip and ridge chimney cap style has a roof ridge along the top. Easy installation instructions are included. The wide base makes for a simple installation. As with all of Rockford's chimney caps a Lifetime Warranty is included.

Proudly made in the United States with attention to the best quality you expect from Rockford. FREE Shipping to any of the lower 48 US States. If you would like your cap shipped to Canada, call us at 1-248-446-8211 so we can make the shipping arrangements for you.